Measuring velocity and potential energy.
How did I get here? A Physics Lab Technician? A series of events, good and bad, a Philosophy Degree, 12 years in IT, a series of varied jobs, now I’m here, and I love it. Perhaps it was all just leading to this. But still, I’m a philosopher in Physics – how does that work? Very well as it happens :-)
Monday, 5 November 2018
Monday, 29 October 2018
Biome
The Pond Biome has finally settled properly. The particulates in there must have been VERY fine as they took along while to settle.
Lots of wiggly gribbly things in there and the weed seems to have perked up. :-)
Hoping the balance of Oxygen and Carbon dioxide works out well.
Moss Biome appears to be settling in. I'm sure its looking better than it did at set up.
Lots of wiggly gribbly things in there and the weed seems to have perked up. :-)
Hoping the balance of Oxygen and Carbon dioxide works out well.
Moss Biome appears to be settling in. I'm sure its looking better than it did at set up.
Friday, 12 October 2018
Biomes
Slight but very fun deviatiaion into other subjects.
I made a Pond Biome and a Moss Biome.
Both are sealed units so we'll see how they go :-)
Pond Bio is slowly clearing and it turns out I have a baby SWAN MUSSELL in there !
Also some Daphnia and other unknown wibbly gribbly things.
The Moss Bio has a few diff species of Moss and some landscaping that I couldnt resisist.
I also made a couple of Micro Moss Biomes, with a tiny amount of sand and substrate and a tiny amount of Star Moss. I also added some micro lanscaping to those and they look ace :-)
I made a Pond Biome and a Moss Biome.
Both are sealed units so we'll see how they go :-)
Pond Bio is slowly clearing and it turns out I have a baby SWAN MUSSELL in there !
Also some Daphnia and other unknown wibbly gribbly things.
The Moss Bio has a few diff species of Moss and some landscaping that I couldnt resisist.
I also made a couple of Micro Moss Biomes, with a tiny amount of sand and substrate and a tiny amount of Star Moss. I also added some micro lanscaping to those and they look ace :-)
Resonance Tubes
These are for measureing sound resonance at different lengths.
Cutting perspex tube is a pain in the a.....
Thursday, 5 July 2018
Slippery Slope
Got a ramp built.
Will be using this for friction tests, car crash and acceleration experiments, and a host of other things.
Will be using this for friction tests, car crash and acceleration experiments, and a host of other things.
Friday, 11 May 2018
Wizzy Mixer
Another Wizzy Mixer failing.
Same as last time, stripped it, cleaned it, lubed it.
Readjusted the bearing sleeves.
Wizzy Mixing again !
Same as last time, stripped it, cleaned it, lubed it.
Readjusted the bearing sleeves.
Wizzy Mixing again !
Wednesday, 2 May 2018
Hovercraft
Building some model Hovercraft....
Some basic materials...
Make sure to let them dry well....
Blow up a balloon, add it to the drinks nozzle, and the air deflates underneath creating a cushion of air the CD can ride on.....
Saturday, 28 April 2018
Electroscope
Lesson learnt. Working with Gold Leaf is a total #@! of a job...
Needed to fix two Electroscopes.
There's a tiny piece of gold leaf about 2 atoms thick, glued at one end to a metal probe.
I had to cut new leaf and stick it to the probe. Its a nightmare to cut as it just tears.
Much swearing later, I got it done :-)
Needed to fix two Electroscopes.
There's a tiny piece of gold leaf about 2 atoms thick, glued at one end to a metal probe.
I had to cut new leaf and stick it to the probe. Its a nightmare to cut as it just tears.
Much swearing later, I got it done :-)
Blue & Green stuff.. makes Brown stuff
Been looking into learning a little basic chemistry.
Interesting stuff.
And loving my Junior Chemistry book. :-)
Interesting stuff.
And loving my Junior Chemistry book. :-)
Friday, 27 April 2018
Wizzy Mixer
This thing heats and mixes liquids / chemicals by whizzing a metal bar around via Magnets underneath.
Its whizzer was stuck.
I fixed it.
Its whizzer was stuck.
I fixed it.
Thursday, 26 April 2018
Melting point kit
Fixed.
This thingy had glass and corrosion stuck in some VERY tiny tubes in a brass heating block.
Works a treat now :-)
Tested it afterwards and the heat got to 240oC.
Obviously I burnt myself on it. :-(
Here's a FLIR image to see the heat. It also shows the heat travelling up the thermometer.
This thingy had glass and corrosion stuck in some VERY tiny tubes in a brass heating block.
Works a treat now :-)
Tested it afterwards and the heat got to 240oC.
Obviously I burnt myself on it. :-(
Here's a FLIR image to see the heat. It also shows the heat travelling up the thermometer.
Wednesday, 25 April 2018
Tuesday, 24 April 2018
Monday, 23 April 2018
Alchemy
Love this lol
Instead of using Lead, I might try and turn morons into gold.
I wouldnt be short of materials.....
Instead of using Lead, I might try and turn morons into gold.
I wouldnt be short of materials.....
Sunday, 22 April 2018
Saturday, 21 April 2018
Friday, 20 April 2018
Subscribe to:
Posts (Atom)